Новый Kit от ST на базе процессора STM32F407VGT6 нового поколения Cortex-M4F core.
Ядро M4 отличается от M3 наличием инструкций арифметики с насыщением, MAC (умножение+сложение за один такт), SIMD (одновременное сложение до 4х пар чисел по 8 бит).
Параметры микроконтроллеров данной серии:
Flash – 1 Mb и ОЗУ – 192 кБ.
Встроен сопроцессор чисел с плавающей точкой.
17 таймеров и до 64 ШИМ выходов.
HS USB.
Контроллер LCD и памяти.
Три АЦП
Девайсы доступны в паябельных корпусах, в том числе и tqfp-64.
Все это работает до 168Мгц.
Что есть на плате:
STM32F407VGT6 microcontroller featuring 32-bit ARM Cortex-M4F core, 1 MB Flash, 192 KB RAM in an LQFP100 package
On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST-LINK/V2 (with SWD connector for programming and debugging)
Board power supply: through USB bus or from an external 5 V supply voltage
External application power supply: 3 V and 5 V
LIS302DL, ST MEMS motion sensor, 3-axis digital output accelerometer
MP45DT02, ST MEMS audio sensor, omni-directional digital microphone
CS43L22, audio DAC with integrated class D speaker driver
Eight LEDs:
LD1 (red/green) for USB communication
LD2 (red) for 3.3 V power on
Four user LEDs, LD3 (orange), LD4 (green), LD5 (red) and LD6 (blue)
2 USB OTG LEDs LD7 (green) VBus and LD8 (red) over-current
Two push buttons (user and reset)
USB OTG FS with micro-AB connector
Extension header for all LQFP100 I/Os for quick connection to prototyping board and easy probing